WELL ACCESSORIES
Brand Name: Campbell
*Material: Red Brass
*Product Type: Male Adapter
*Length: 2.5 in.
*Finish: Brass
*Connection Size: 3/4 in.
*3/4"
*Red brass
Brand Name: Campbell
*Material: Red Brass
*Product Type: Male Adapter
*Length: 3.5 in.
*Connection Size: 1 in.
*1"
*Red brass
Brand Name: Campbell
*Material: Red Brass
*Product Type: Male Adapter
*Length: 4 in.
*Connection Size: 1-1/4 in.
*1-1/4"
*Red brass
Brand Name: Campbell
*Material: Red Brass
*Product Type: Male Adapter
*Finish: Brass
*Length: 2.25 in.
*Connection Size: 1/2 in.
*1/2"
*Red brass
Brand Name: Campbell
*Material: Red Brass
*Product Type: Rope Adapter
*Length: 4 in.
*Average Lead Content: Lead-Free
*Connection Size: 1 in.
*Finish: Brass
*1"MPT x 1" barbed
*Fits 1/4" rope
Brand Name: Campbell
*Material: PVC
*Product Type: Torque Arrestor
*Connection Size: 2 in.
*Length: 12 in.
*Protects pump from starting torque
Brand Name: Campbell
*Material: Polyethylene
*Product Type: Snap-In Cable Guard
*Length: 6 in.
*Connection Size: 1-1/4 in.
*Protects submersible wire from abrasion
Brand Name: Campbell
*Material: ABS
*Product Type: Watertight Well Cap
*Finish: Brass
*Connection Size: 6-1/4 in.
*Length: 8 in.
*6-5/8"
*1"NPT conduit connection
*9/16" brass vent screen in bottom casing
Brand Name: Campbell
*Material: Red Brass
*Product Type: Insert Couple
*Length: 1 in.
*Connection Size: 1 in.
*Finish: Brass
*Barb x Barb
Brand Name: Campbell
*Material: Red Brass
*Product Type: Insert Couple
*Length: 1 in.
*Finish: Brass
*Connection Size: 1/2 in.
*1/2"
*Barb x barb
Brand Name: Campbell
*Material: PVC
*Product Type: Slip Coupling
*Connection Size: 1-1/2 in.
*Length: 5 in.
*Couples SCH 40 PVC inside
*Allows uniform outside OD
*1-1/2"
Brand Name: Campbell
*Material: Red Brass
*Product Type: Insert Couple
*Finish: Brass
*Length: 1 in.
*Connection Size: 3/4 in.
Brand Name: Campbell
*Material: Brass
*Product Type: Hydrant Elbow
*Length: 3 in.
*Connection Size: 3/4 in.
*Average Lead Content: Low Lead
*3/4"MPT x 3/4" insert
*Flat sided for hydrant support
*Cast brass
Brand Name: Campbell
*Product Type: Pressure Gauge
*Maximum Pressure: 30 psi
*Stem Size: 1/4 in.
*Average Lead Content: Less than 0.25 %
*Face Size: 2 in.
*Mininum Pressure: 0 psi
*2" face for easy reading
*0-30 PSI gauge (easy read down to single PSI variant
*1/4" NPT stem
Brand Name: Brady
*Product Type: Pressure Gauge
*Maximum Pressure: 100 psi
*Average Lead Content: Less than 0.25 %
*Face Size: 3/4 in.
*Stem Size: 3/4 in.
*Mininum Pressure: 0 psi
*0-100 PSI
*3/4" female hose
*Threaded for easy attachment to outdoor spigot
*Accurately and easily measures incoming pressure anywhere
*A 3/4" thread can be used
*This product contains less than 0.25% weighted average lead content on wetted surfaces
*Lead free version of Ace no. 45347
Brand Name: Campbell
*Material: PVC
*Product Type: Well Point
*Length: 5 in.
*Connection Size: 2 in.
*2"
*Couples SCH 40 PVC inside
*Allows uniform outside OD
Brand Name: Campbell
*Material: ABS
*Product Type: Well Seal
*Connection Size: 1 in.
*Maximum Weight: 20000 lb.
*Length: 4 in.
*1" Drop Pipe x 4" Casing
*ABS body w/PVC gasket
*Zinc-plated bolts/nuts
*Tested to over 20,000 lbs.
*Boxed
Brand Name: Campbell
*Product Type: Pressure Gauge
*Maximum Pressure: 100 psi
*Face Size: 2 in.
*Mininum Pressure: 0 psi
*Stem Size: 1/4 in.
*Material: Stainless Steel
*Average Lead Content: Less than 0.25 %
*2" face
*0-100 PSI gauge
*Steel case
Brand Name: Campbell
*Product Type: Pressure Gauge
*Maximum Pressure: 100 psi
*Face Size: 2 in.
*Stem Size: 1/4 in.
*Material: Polycarbonate
*Mininum Pressure: 0 psi
*Average Lead Content: Less than 0.25 %
*2" face
*0-100 PSI gauge
*Polycarbonate lens
*This product contains less than 0.25% weighted average lead content on wetted surfaces
Brand Name: Campbell
*Product Type: Pressure Gauge
*Maximum Pressure: 200 psi
*Material: Polycarbonate
*Face Size: 2 in.
*Mininum Pressure: 0 psi
*Average Lead Content: Less than 0.25 %
*Stem Size: 1/4 in.
*1/4 in. thread
014001300009
*Material: Steel
*Product Type: Probing Rod
*Length: 4 ft.
*Number in Package: 1 pk
Brand Name: Campbell
*Material: Plastic
*Product Type: Self-Clamping Wire and Pipe Protector
*Connection Size: 1 in.
*Length: 6 in.
*Fits standard galv. & 125-200 PSI poly pipe
*Ready to use in 6" well casings
Brand Name: Campbell
*Material: Red Brass
*Product Type: Pitless Adapter
*Average Lead Content: Lead-Free
*Connection Size: 1 in.
*Length: 4 in.
*Unique flanged gasket/collar
*Complies w/all EPA guidelines
*Boxed
Brand Name: Campbell
*Material: ABS
*Product Type: Well Seal
*Maximum Weight: 20000 lb.
*Length: 7 in.
*Connection Size: 1 in.
*1" Drop Pipe x 6" Casing
*ABS body w/PVC gasket
*Zinc-plated bolts/nuts
*Tested to over 20,000 lbs.
*Boxed
Brand Name: Campbell
*Material: ABS
*Product Type: Well Seal
*Length: 7 in.
*Maximum Weight: 20000 lb.
*Connection Size: 1-1/4 in.
*1-1/4" Drop Pipe x 6" Casing
*1" Return
*ABS body w/PVC gasket
*Zinc-plated bolts/nuts
*Tested to over 20,000 lbs.
*Boxed
Brand Name: Campbell
*Wire Size: 14-10 AWG
*Wire Type: Heat Shrink (Heavy Wall)
*Product Type: Splice Kit
*Color: Black
*Number in Package: 4 pk
*Packaging Type: Bagged
*Wire length: 3 inch
Brand Name: Campbell
*Material: Brass
*Product Type: Tank Cross
*Finish: Brass
*Length: 10 in.
*Connection Size: 1 in.
*1"MPT tank connection
*1"MPT x 3/4"FPT line connection
*1/4"FPT top tap (2)
*10" tank leg
*5-1/2"W
Brand Name: Campbell
*Material: Brass
*Product Type: Tank Cross
*Length: 16 in.
*Connection Size: 1 1/4 in.
*1-1/4" long
*1-1/4"MPT tank connection
*1-1/4"MPT x 1"FPT line connection